Analyzing the influential factors of industry 4.0 in precision machinery industry
PDF

How to Cite

LAI, W.-H., & CHEN, C. H. (2020). Analyzing the influential factors of industry 4.0 in precision machinery industry. Journal of Social and Administrative Sciences, 7(2), 96–112. https://doi.org/10.1453/jsas.v7i2.2047

Abstract

Abstract. Nowadays the science and technology progresses not only create the change to have a big impact on various industries, but also stimulate Industry 4.0 being applied in the manufacturing industry to achieve manufacturing efficiency and to reduce its cost to increase additional values. This study uses the Analytical Hierarchical Process (AHP) evaluation method, which considers four criteria layers: Internet of things factors, Automationfactors, Intelligent factors, Big data factors, and twelve influence factors in sub-layer are: perceived layer, network layer, application layer, field layer, management layer, control layer, process control visualization, system supervisory and control omni bearing, green energy manufacturing production, variety, volume, and velocity. Then, the relative risk indicator (RRI) is obtained by the Analytical Hierarchical Process method, and the overall risk indicator (ORI) can be obtained after introducing the evaluation value of each impact factor through the case. The research results confirm that the risk assessment values obtained the hierarchical analysis method are consistent. This research through the Analytic Hierarchy Process, then discusses Industry 4.0 pair of Taiwan's precision machinery industry management pattern institute emphatically face with target, expected will provide the existing machine manufacture industry as well as the future wants to invest the precision machine industry the management policy-maker reference value, also might take the government policy consideration factors and the machine manufacture industry scholars study the academic for reference.

Keywords. Industry 4.0, Precision machine industry, Analytic Hierarchy Process.

JEL. L22, M11, O14.
https://doi.org/10.1453/jsas.v7i2.2047
PDF

References

Akhavan-Hejazi, H., & Mohsenian-Rad, H. (2018). Power systems big data analytics: An assessment of paradigm shift barriers and prospects. Energy Reports, 4, 91-100. doi. 10.1016/j.egyr.2017.11.002

Ahuett-Garza, H., & Kurfess, T. (2018). A brief discussion on the trends of habilitating technologies for Industry 4.0 and Smart manufacturing. Manufacturing Letters, 15(Part B), 60-63.doi. 10.1016/j.mfglet.2018.02.011

Atzori, L., Iera, A., & Morabito, G. (2010). The internet of things: a survey. Comput. Networks 54 (15), 2787-2805. doi. 10.1016/j.comnet.2010.05.010

Chen, T., Yang, Y., & Dong, Z. (2018). Machine tool industry 4.0 patent trend analysis, Intellectual Property Rights Monthly, 229(1),63-78.

Chen, J. (2016). On the inspiration of "Industry 4.0" to promote "green manufacturing" in China, and the Office of Energy Saving and Carbon Reduction Promotion of the Ministry of Economic Affairs.

Du, Z. (2016). Ten minutes to understand what is Industry 4.0, regional industry integration development plan. [Retrieved from].

Deng, Z., & Zeng, G. (1989). Connotation characteristics and application of hierarchical analysis (AHP). Chinese Journal of Statistics, 27(6), 5-22.

Gubbia, J., Buyya, R., Marusica, B.S., & Palaniswamia, M., (2013). Internet of things (IoT): A vision, architectural elements, and future directions. Future Gener. Comput Syst. 29(7), 1645–1660. doi.10.1016/j.future.2013.01.010

Jazdi, N. (2014). Cyber physical systems in the context of Industry 4.0. In Automation, Quality and Testing, Robotics, 2014 IEEE International Conference, 1-4. doi.10.1109/AQTR.2014.6857843

Kouicem, D.E., Bouabdallah, A., & Lakhlef, H. (2018). Internet of things security: A top-down survey. Computer Networks. 141, 199-221. doi.10.1016/j.comnet.2018.03.012

Khaloufi, H., Abouelmehdi, K., Beni-hssane, A., & Saadi, M. (2018). Security model for Big Healthcare Data Lifecycle. Procedia Computer Science, 141, 294-301. doi.10.1016/j.procs.2018.10.199

Lin, M. (2017). "Industrial Big Data" Book Excerpt: Wisdom Transformation and Value Innovation in the Industry 4.0 Era, Enterprise Communication.

Lee, J., Kao, H. A., & Yang, S. (2014). Service innovation and smart analytics for industry 4.0 and big data environment. Procedia Cirp, 16, 3-8. doi. 10.1016/j.procir.2014.02.001

Liu, H. (2017). Integrating the internet of things Architecture and Intelligent Home Appliance Controller in Energy Management System Research, National Kaohsiung University of Applied Sciences' Electrical Engineering Degree Thesis, 1-76.

Löfving, M., Almström, P., Jarebrant, C., Wadman, B., & Widfeldt, M. (2018). Evaluation of flexible automation for small batch production. Procedia Manufacturing, 25, 177-184. doi. 10.1016/j.promfg.2018.06.072

Lu, M. (2018). The coming of the Industry 4.0 era: Machinery Industry 4.0, [Retrieved from].

Lin, J. (2012). The era of smart manufacturing is coming, the equipment becomes smarter, DIGITIMES planning, [Retrieved from].

Lin, J. (2017). The impact of industrial intelligence and digitalization on the employment market, Economic Prospects, 172, 48-51.

Lin, E. (2016). From storage, mining to communication, leading a new face of the industry: Big Data (Big Data). [Retrieved from].

MIRL, (1998). Taiwan Yearbook of Machine Tools Research Report. Taiwan: Industrial Technology Research Institute.

Ma, R. (2013). Looking at the opportunities and challenges of Taiwan industry from the trend of international wisdom manufacturing. Electrical and Electronic Environmental Development Association. [Retrieved from].

Oussous, A., Benjelloun, F. Z., Lahcen, A. A., &Belfkih, S. (2017). Big Data technologies: A survey. Journal of King Saud University-Computer and Information Sciences. 30(4), 431-448. doi. 10.1016/j.jksuci.2017.06.001

Paravizo, E., Chaim, O. C., Braatz, D., Muschard, B., & Rozenfeld, H. (2018). Exploring gamification to support manufacturing education on industry 4.0 as an enabler for innovation and sustainability. Procedia Manufacturing, 21, 438-445. doi. 10.1016/j.promfg.2018.02.142

Qi-Feng Information, (2015). From the internet to the internet of things. [Retrieved from].

Saaty, T.L. (1971). The Analytic Hierarchy Process, New Your. Prentice Hall Inc., 142-167.

Smart Industry, (2017), the top ten trends of the global industrial automation industry in 2017. [Retrieved from].

Torrecilla, J.L., & Romo, J. (2018). Data learning from big data. Statistics & Probability Letters, 136, 15-19.doi. 10.1016/j.spl.2018.02.038

Wu, W. (2000). The Third Edition of the Enterprise Research Method, Huatai Culture.

Wang, M. (2014). The manufacturer fully deployed the smart factory. [Retrieved from].

Wang, S., Wang S., Zhang Z., & Lu K. (2016). Using situational awareness and information feedback mechanisms to improve the quality of e-commerce services in the Internet of Things, International Journal of Information Technology, 10(2), 44-51.

Wu, Y. (2015). Smart factories make the production process smarter! Digital Age, 249(2), 245-256.

Xie, M. (2017). Analyzing industrial automation from the communication level, DIGITIMES project, [Retrieved from].

Zaslavsky, A., Perera, C., & Georgakopoulos, D. (2013). Sensing as a service and big data. arXiv: 1301.0159. [Retrieved from].

Zhang, Y., Luo, H., & He, Y. (2015). A system for tender price evaluation ofconstruction project based on big data. Procedia Engineering, 123, 606-614. doi. 10.1016/j.proeng.2015.10.114

Zhang, H. (2017). Automation exhibition, Delta's smart production line will be unveiled, Business Times, [Retrieved from].

Zeng, Y. (2015). The era of Industry 4.0: automation, intelligence, system virtuality and reality, is to make smart manufacturing! ARES Newsletter, [Retrieved from].

Zeller, A., & Weyrich, M. (2018). Composition of Modular Models for Verification of Distributed Automation Systems. Procedia Manufacturing, 17, 870-877. doi.10.1016/j.promfg.2018.10.139

Zeng, Y. (2015). Industry 4.0 Era: Automation, intelligence, and system virtualization are just smart manufacturing! Zitong Electronic News.

Zhang, Y., Luo, H., & He, Y. (2015). A system for tender price evaluation ofconstruction project based on big data. Procedia Engineering, 123, 606-614. doi.10.1016/j.proeng.2015.10.114

Zheng, Y. (2011). An analysis of the Internet of Things technology, i-Thome. [Retrieved from].

Creative Commons License
This article licensed under Creative Commons Attribution-NonCommercial license (4.0)

Downloads

Download data is not yet available.